Cementitious Fireproofing (SFRM)
CSI 07 81 16. Spray-applied fire-resistive material for steel, joists and deck.
Licensed in Louisiana, Mississippi and Alabama
For more than 80 years, Calmar Corporation has protected and insulated the Gulf South’s hospitals, hotels, stadiums, offices and schools. We apply cementitious and intumescent fireproofing, closed-cell and open-cell spray foam, K-13 thermal and acoustical insulation, spray-on fiberglass, pour-in-place (PIP) flotation foam and polyurea coatings, from new construction to occupied renovations.
CSI 07 81 16. Spray-applied fire-resistive material for steel, joists and deck.
CSI 07 81 23. Thin-film coatings for exposed and architecturally exposed structural steel.
CSI 07 21 19. Open- and closed-cell spray polyurethane foam, plus K-13 acoustical, spray-on fiberglass and polyurea, and pour-in-place (PIP) flotation foam.
Behind ceilings, around structural steel, and within building assemblies, Calmar installs systems that help protect lives in a fire, control heat, and reduce noise—supporting safer, more comfortable places to live and work.
Much of that protection is passive fire protection. Spray fireproofing stays in place on structural steel, helping slow heat transfer during a fire without relying on a switch, alarm, or water supply. Proper installation, inspection, and maintenance help it perform as designed. Insulation and acoustical treatments serve a different everyday purpose: helping control heat and noise.
New Orleans, LA · Multi-phase project
2 photosBaton Rouge, LA · White K-13 sprayed to the roof deck underside for sound attenuation
New Orleans, LA · Multi-story West Tower expansion · Under construction
2 photosNew Orleans, LA · Live music venue
New Orleans, LA · Multi-phase, 5+ years · Completing 2026 with the Imaginarium
5 photosNew Orleans, LA
3 photos
New Orleans, LA · GC: Ryan Gootee General Contractors
5 photosNew Orleans, LA · Office build-out in a former oil rig
3 photos
New Orleans, LA
New Orleans, LA · Historic hotel renovation
New Orleans, LA · Mid-rise hotel
Baton Rouge, LA · Medical office building
2 photosNew Orleans, LA · New office building
Scopes we perform by CSI MasterFormat section. Products are installed as specified; listed manufacturers are typical, not exclusive.
| CSI | Scope | Description | Typical products |
|---|---|---|---|
| 07 81 16 | Cementitious Fireproofing (SFRM) | Spray-applied cementitious fire-resistive material for structural steel, joists and deck, applied to the UL design and thickness the documents specify. | Carboline Southwest, GCP/Grace Monokote, Isolatek |
| 07 81 23 | Intumescent Fireproofing | Thin-film intumescent coatings for exposed and architecturally exposed structural steel. | Isolatek, Carboline, Hilti |
| 07 81 26 | Mineral Fiber Fireproofing | Spray-applied mineral fiber fire-resistive material where specified. | As specified |
| 07 81 00 | Applied Fireproofing | General applied fireproofing scopes, including repair and patching of existing fireproofing during renovations. | As specified |
| 07 21 19 | Foamed-in-Place Insulation | Open- and closed-cell spray polyurethane foam for thermal insulation and air/vapor control. | BASF WALLTITE, Huntsman |
| 07 21 29 09 81 29 09 83 16 | Sprayed Cellulose Thermal & Acoustical Insulation | Spray-applied cellulose for exposed ceilings and walls: thermal insulation (Div. 07) and sprayed acoustical insulation / acoustical ceiling finish (Div. 09). | International Cellulose K-13, SonaSpray “fc” |
| 07 21 29 09 81 29 | Spray-On Fiberglass Insulation | Spray-applied fiberglass thermal insulation (Div. 07) and sprayed acoustical insulation (Div. 09). | As specified |
| — | Pour-in-Place (PIP) Flotation Foam | Pour-in-place (PIP) flotation foam, as specified. | As specified |
| — | Polyurea Coatings | Spray-applied polyurea coatings, as used over closed-cell spray foam on the Superdome exterior. | As specified |
We install systems from manufacturers including those below. As specified.
Based in Elmwood, Louisiana. Licensed in Louisiana, Mississippi and Alabama, serving the Gulf South, including New Orleans, Baton Rouge, Covington and the Northshore.
Established in 1944, Calmar Corporation is a fireproofing and spray insulation specialty subcontractor based in Elmwood, Louisiana, and licensed in Louisiana, Mississippi and Alabama. Our work includes hospitals and medical office buildings, hotels and casinos, stadiums and venues, offices and schools.
We work for general contractors, design-build teams and owners, and follow the architect’s and engineer’s documents: submittals up front, application to the specified assemblies, and documentation ready for inspection.
Systems and products we install.
07 81 00 Applied Fireproofing, 07 81 16 Cementitious Fireproofing (SFRM), 07 81 23 Intumescent Fireproofing, 07 81 26 Mineral Fiber Fireproofing and 07 21 19 Foamed-in-Place Insulation (open- and closed-cell spray polyurethane foam). We also apply spray-applied cellulose (K-13) and spray-on fiberglass insulation under 07 21 29 Sprayed Insulation, 09 81 29 Sprayed Acoustic Insulation and 09 83 16 Acoustic Ceiling Coating, plus polyurea coatings and pour-in-place (PIP) flotation foam.
SFRM (07 81 16) is a spray-applied cementitious material, typically used on concealed structural steel, joists and deck. Intumescent fireproofing (07 81 23) is a thin-film coating that expands when exposed to heat and is typically used on exposed steel where appearance matters. The required product and thickness come from the UL-listed assembly and fire-resistance rating in the contract documents.
We are approved applicators of BASF (WALLTITE closed-cell SPF), Carboline (Southwest, intumescent coatings), GCP Applied Technologies (Monokote), Huntsman Building Solutions, International Cellulose (K-13, SonaSpray), Isolatek International (CAFCO, Blaze-Shield, SprayFilm) and Hilti.
Yes. We provide submittal packages with product data and the UL listings for the assemblies specified in the documents.
Calmar Corporation is based in Elmwood, Louisiana, and serves Louisiana, Mississippi, and southern Alabama from Montgomery to Gulf Shores, including New Orleans, Baton Rouge and the Northshore.
We provide a standard warranty.
Email plans and specifications to [email protected], or call 504.464.6242.
Product data, UL design listings for the assemblies as specified, thickness and density schedules, safety data sheets (SDS), and a standard warranty letter.
Hospitals and medical office buildings, hotels and casinos, stadiums and venues, offices and schools, including new construction and renovation.
Yes. We provide inspection-ready documentation and coordinate access for the special inspector to verify thickness and density.
Email plans and specifications for fireproofing or spray insulation scopes. We respond with scope review, product questions and a proposal.