Intumescent Fireproofing
Fire protection with exposed steel in mind.
Calmar Corporation · Established 1944 · Serving Louisiana and the Gulf South.
See this service at Ampirical
How it works, and where it belongs
Thin-film intumescent is a coating that goes on like paint. In a fire it expands and forms a char that insulates the steel. We use it on exposed structural steel — in offices, lobbies and public areas where the steel is part of the design, and where it can be seen through curtain wall glass.
Calmar applies thin-film systems from Isolatek, Carboline and Hilti. The listed design still sets the product and thickness on the job. Send the plans and specs, and we’ll review the scope.
| Water-based | Solvent-based | |
|---|---|---|
| Typical use | Usually interior exposed steel | Interior, and exterior or humid exposure when the system is approved for it |
| Primer and topcoat | A compatible primer, then a finish coat when the system calls for it | A compatible primer, and an approved topcoat for exterior or more demanding exposure |
Water-based coatings are the usual choice indoors. A few water-based systems are also made for exterior steel, but only as a complete system. Solvent-based coatings are often selected when the steel is outside or in a more demanding, humid environment.
Either way, the steel needs a compatible primer. In exterior or high-humidity areas, a protective topcoat is part of the system. In a conditioned interior space, a finish coat is often optional and is there for color and looks.
A Calmar example is the Ampirical Office Building in Covington, where we applied both cementitious and intumescent fireproofing. The intumescent is on the exposed steel, where the finish is part of the look of the space.
Typical uses from Isolatek, Carboline and Hilti product data.
See the work at Ampirical
The Ampirical Office Building project page has photos of the Covington job, including the exposed steel.
Questions before a proposal
What information should I send?
Send plans and specifications, including the required assemblies and fire-resistance requirements, for scope review.
Does this page specify a fire-resistance rating?
No. Ratings depend on the approved assembly and specified system. Project photographs and general service descriptions are not substitutes for the project’s design requirements.
Start with the right scope.
Send plans and specifications for a fireproofing scope review and proposal.
Send bid documents